Learing method:
Press and hold the learning button for three seconds, the indicator light is off (indicating that it has entered the learning state), release the learning button, press any button on the remote control, the indicator light flashes four times and then the light is always on to indicate that the learning is successful.
Note: This controller can learn 16 different coded remote controllers such as fixed code/learning code. If it exceeds, it will clear the earliest learned remote control.
Clear method:
Press and hold the learning button for about 8 seconds. The indicator will turn off and return to light.
Work mode switching:
Switch the working mode by short circuit, short circuit 1, 2, 3 different places.
1. Jog – short circuit cap is vacant
2. Self-locking – shorting 1, 2
3. Interlock – shorting 2, 3
The meaning of self-locking/interlocking/jogging:
Interlock: Press the corresponding button of the remote control, the corresponding relay is turned on, and then press another remote control button; the relay is disconnected.
Non-lock, jog: Press the remote control button, the corresponding relay is turned on, release the remote control button; the corresponding relay is disconnected.
Self-locking: Press the remote control button once, the relay is turned on, press the remote control button again, the relay is disconnected.